Gabatarwa

Shanghai Muxiang Environmental High-Tech Co., Ltd. da aka kafa a cikin 2006, babban kamfani ne na fasaha na fasaha wanda ke mai da hankali kan injunan sarrafa kansa da kayan aiki bisa kasar Sin da fuskantar duniya.Kamfanin ya haɗu da ƙirƙira, masana'antu, tallace-tallace, da sabis.Babban mai kera kayan aikin sarrafa kansa ne a China.Babban gudanarwar kamfaninmu ya fito ne daga shugabannin da aka jera na kamfanonin da ke da ƙwarewar gudanarwa.Ƙungiyar R&D ta ƙunshi injiniyoyi waɗanda ke da ƙwarewar fiye da shekaru goma a cikin R&D na kayan aiki da masana'antu.Ta hanyar manyan ingantattun fasahar R&D na masana'antu da kuma gogewar fiye da shekaru goma wajen yin hidima ga abokan ciniki kusan 1,000 masu inganci, muna da manyan fasahar R&D a kasar Sin.Kimanin haƙƙin ƙirƙira 50 na kamfani ne, kuma ƙimar yabo mai girma na samfurin ya wuce 95%.Kamfaninmu ya keɓance wannan makirci don kamfanin ku.

Bayanin Tsarin： Haɗa na'ura mai ɗaukar hoto da mai ɗaukar hoto.

Tsarin fasaha： Sanya kayan da hannu akan mai jigilar karkace, Abubuwan karkace daga bene na uku zuwa bene na farko kuma shigar da injin telescopic.

1.Bayanan ƙira na asali

1.1 Na asali bayani

Abun ciki	Bayanan asali	Ramar
Wurin shigarwa
zafin jiki	-5ºC - 45ºC
Danshi	5% ~ 95% (Babu ruwa)
Surutu	≤75db
Kwanakin Aiki	Kwanaki 7 a kowane mako
Lokacin Aiki	16 hours a rana;
Wutar lantarki mai aiki	3-lokaci 380 VAC ± 10%, 50HZ± 1HZ	Wayar ƙasa da sifilin waya za su kasance da ƙarfi

 

							rabu, kuma ƙimar juriya na ƙasa bazai wuce 4 Ω ba
	Bukatun kariya	IP55 don mota, IP65 don kayan aikin filin da firikwensin, IP54 don majalisar sarrafawa da panel na aiki;
	Kayayyakin sufuri	Garin alkama 1200(L)*700(W)	PP	saƙa	jaka	,
	Nauyin samfur	MAX.70kg
	Yanayin sufuri	Ciyarwar da hannu, jemage 10 a minti daya.

 

1.2 Abubuwan da suka dace da kayan aiki

Bukatar sarari 

Girman buɗe ƙasa: 2800 * 2800

● Tushen wutan lantarki bukatun

Jimlar samar da wutar lantarki:380VAC ± 10%, 50Hz ± 1Hz, uku-lokaci biyar tsarin waya;

Kayan wutar lantarki na taimako:220VAC ± 10% ， 50Hz ± 1 Hz ， tsarin wayoyi guda biyu na zamani;

● Yanayin aiki bukatun 

Yanayin yanayi na cikin gida:-5 ℃ – 45 ℃

zafi na cikin gida: 5% - 95%, babu ruwa;

● Injiniyan jama'a bukatun

An gyara na'urar dunƙule ta hanyar sinadari anchor bolt M12 + saman sandar diagonal, wanda aka gyara a buɗe ginin corridor..

1.A kayan da aka yi da 304 bakin karfe farantin karfe.

2.The nisa na karkace slide ne 1000 mm.

3. The filin na karkace slide ne 3000mm.

4.Bambanci tsakanin mashigai da kanti na karkace slide ne 5800 mm

5.The tsawo na karkace slide ƙofar daga bene na uku ne 800mm

6.The tsawo na karkace slide fita daga kasa bene ne 1000mm

7.The mashiga da kanti na karkace slide an shirya 180 digiri

8.The Gudun shugabanci na abu a kan dunƙule ne a agogon hannu.

9.The kanti na karkace slide hanya ne 1000 mm sama da ƙasa, da telescopic bel conveyor da aka haɗa a kasa.

10.The karkace slide an lazimta da flange butting dunƙule, wanda ya dace da shigarwa.Ya dace da shigarwa na zamani da splicing a cikin ƙaramin sarari.

Bayanin sigogin fasaha:

1.Kayayyakin sufuri

1.1Sunan samfur:akwati ko samfurin jaka

1.2Girman samfur:(tsawo x nisa x tsawo) wanda abokan ciniki ke bayarwa

1.3Nauyi: 70kg / guda.

1.4Lokacin isarwa: guda 10/min.

2.Abubuwan buƙatun asali na bel telescopic mai ɗaukar kaya

2.1 daidaitattun sassan 4, mita 6 na jiki, mita 12 na tsawo, mita 18 gaba ɗaya.

2.2Faɗin bel 800mm.

2.3tsayin injin telescopic900 mm.

3.Sarrafa da aiki

3.1Babban wutar lantarki:380V, 3Ph, 50Hz

3.2Babban haɗin wutar lantarki:samar da wutar lantarki mai zaman kanta da abokan ciniki ke bayarwa

3.3Wutar lantarki mai sarrafawa: 24dc ku

3.4Tasha gaggawa:2 gabaɗaya, babban harsashi 1 da 1 a ƙarshen gaba

3.5Gudun bel:20-45m/min

3.6Hanyar aiki:gaba / baya

3.7Ƙarfi 2.2kW;

3.8Tushen bel:motar ragewa tana korar abin nadi ta hanyar sarkar sprocket.

3.9Saurin mikewa:11m/min;

3.10Ƙarfi 0.75kw;

3.11Ikon haɓakawa:danna maɓallin gaba na injin;

3.12Ikon ja da baya:danna maɓallin gaba na injin;

3.13Janyewar gaggawa:maɓalli na gaba;

3.14Haske: 2 fitilu a gaban gaba

3.15Sanin samfur:shigar a gaban karshen

3.16Kwamitin sarrafawa:shigar a gaban gaban babban firam

4.Yanayin aiki na kayan aiki da wurare

4.1Tushen wutan lantarki:uku kashi biyar tsarin waya;

4.2Wutar lantarki: 380V ± 10%; Mitar: 50 Hz ± 2%;

4.4Yanayin yanayi:lokacin rani ≤ 45 ℃, hunturu ≥ - 30 ℃;

4.5Yanayin muhalli:dangi zafi ≤ 79%;

5.Amintaccen kayan aiki da kariya

5.1 Zane-zane na kayan aiki da kayan aiki ya dace da sabbin ka'idojin kare lafiyar duniya;

5.2 Kayan aiki da kayan aiki dole ne su kasance da cikakkun na'urorin kariya;

5.3 Kariya dabam don sassa masu motsi da mai, ruwa, gas, wayoyi, igiyoyi, da dai sauransu

5.4 Hayaniyar kayan aiki da kayan aiki a cikin aiki ≤ 80dB (a);

5.5 Kayan aiki da kayan aiki za su kasance tare da maɓallin dakatar da gaggawa ko sauyawa lokacin da ya cancanta, wanda za a shigar da shi a matsayin da ya dace don aiki tare da launi mai haske;

5.6 Launi na shinge da na'urar haske shine launi na gargadi ko launi na gargadi;

5.7 Launuka masu aminci kamar alamar aminci da siginar aminci sun dace da daidaitattun iso3864 na ƙasa;

6.Surface jiyya na kayan aiki da wurare

6.1 Baƙin ƙarfe bayanan martaba da welding, zanen karfe Tsarin da welding a saman kayan aiki da wurare za a bi da su da filastik fesa;

6.2 Launi na bayyanar kayan aiki da kayan aiki dole ne a bi da su daidai

tare da katin launi da aka bayar a cikin kwangilar, kuma launuka daban-daban da ake buƙata don ƙirar ƙirar za a yarda da Jam'iyyar A;

6.3 saman sassan watsawa za su zama baki ko galvanized;

6.4 Abubuwan daidaitattun abubuwan da aka saya za su kasance ƙarƙashin launi na farko;(ko aka saya bisa ga tsarin aiwatarwa da Jam'iyyar A ta gabatar)

6.5 Launi na shinge da na'urar kariya shine launi na gargadi ko launi na gargadi;ko launi da Jam'iyyar A ta gabatar;

7.Tsarin kayan aiki ka'ida

7.1 Mai jigilar kaya yana da kyakkyawan bayyanar, tsari mai mahimmanci, aiki mai sauƙi da kulawa, kuma ya dace da bukatun ergonomics;

7.2 Tsarin watsawa yana da ma'ana, aikin yana da kwanciyar hankali kuma aikin yana dogara;

7.3 Za a tsara kayan aikin lantarki na asali kuma za a zaɓa daidai da kwangila don tabbatar da babban kwanciyar hankali, aminci da aminci na dukan tsarin kulawa;

7.4 Za a yi la'akari da dacewa da sufuri da shigarwa kamar yadda zai yiwu a cikin ƙirar kayan aiki da kayan aiki;

7.5 Garanti don samar da kayan aikin samar da farashi mai tsada bisa ga tsarin samar da taro, fitarwa, sarrafawa da kiyayewa;

8.Kula da lantarki

8.1 zaɓin motoci

8.1.1 Ƙarfin wutar lantarki na motar ya dace da buƙatun kaya, kuma ƙarfin motar, mai ragewa da mai sauya mita ya dace da aikin;

8.1.2 bisa ga yanayin muhalli na Jam'iyyar A, zaɓi yanayin samun iska mai dacewa, tsarin tsari da matakin kariya;

8.1.3 A gefe coefficient na uku-lokaci mota ne 1.5-2.0, da kuma zafin jiki Yunƙurin a lokacin dogon lokaci aiki ba zai wuce 65 ℃ (Grade E) da 70 ℃ (Grade B);

8.2 zaɓi da shigarwa na kayan aikin lantarki

8.2.1 Da'irar tana da fiye da na yau da kullun, asarar lokaci, nauyi da sauran ayyukan kariya.Ya kamata a zaɓi ƙarfin canzawa yadda ya kamata kuma ƙarfin yin nauyi ya isa;

8.2.2 Za a shirya kayan aikin lantarki na asali cikin tsari tare da bayyanannun alamun layi.Na'urorin lantarki na asali da tashoshi za a haɗa su ta hanyar latsa sanyi tare da ƙugiya, kuma wayoyi za su kasance masu ƙarfi ba tare da sako-sako ba, karye ko yaduwa;

8.2.3 Ana amfani da tarkacen filastik a cikin akwatin sarrafawa, kuma lambar waya, kwamiti mai kulawa da lakabin suna da tsabta da tsabta.

8.2.4 Shigar da kayan aikin lantarki ya dace da ƙayyadaddun ƙayyadaddun fasaha na shigarwa, tare da na'ura mai mahimmanci na ƙasa, juriya na ƙasa ≤ 4 Ω, da juriya na tsarin lantarki zuwa ƙasa ≥ 50m Ω;